FORTRESS America Is Preparing Bases to Operate Without the Grid

On September 30, the Secretary of War announced FORTRESS America, a program to make U.S. military installations resilient to cyberattack, sabotage, and supply shocks. The goal is the right one  (opens in a new tab): “If an adversary takes down the grid—by cyberattack, by sabotage, or by any means—our bases stay lit. Our aircraft keep flying. Our command centers never go dark.”

As the Pentagon begins considering how installations could sustain operations for extended periods without outside support, the question becomes broader than independent electricity generation. What happens to aircraft, ground vehicles, and other systems that depend on liquid fuels? Strategic reserves provide an essential first layer of protection, and on-base fuel production can keep critical fuel supplies replenished when a disruption outlasts those reserves.

The Department is already moving forward with electricity through microgrids, battery storage, and new generation on base. FORTRESS is preparing installations to operate independently of the civilian grid. AIRCO has developed technology that extends that independence to liquid fuel production.

Why a Microgrid Can’t Fuel a Jet

Every aircraft, tactical vehicle, and backup generator on an installation runs on liquid fuel. That fuel arrives by pipeline, barge, and truck from commercial refineries, and those refineries depend on the same grid and networks FORTRESS expects adversaries to target.

We saw how quickly that chain can break in 2021. A ransomware attack shut down the Colonial Pipeline, and fuel ran short up and down the East Coast. The disruption exposed a vulnerability the Department has yet to close.

On-base storage buys a fixed amount of time. A long crisis outlasts it. Once the tanks run dry, a base can have all the electricity it wants and still be unable to launch a sortie.

The challenges of traditional fuel supply

Challenge

Impact on Energy Security

Pipeline dependency

A single cyberattack can halt fuel delivery across an entire region

Refinery concentration

Commercial refineries sit outside Department of War (DoW) control and rely on civilian infrastructure

Truck and barge logistics

Vulnerable to physical disruption, weather events, and adversary interdiction

Fixed stockpile limits

On-base reserves are finite and run down during sustained operations

Grid-dependent supply chain

Every link in the chain relies on the same networks adversaries target

Making Fuel Where It’s Used

We developed the AIRCO MAD Fuel System™, a modular system that produces fully formulated synthetic jet fuel and diesel from air and electricity (carbon dioxide and power). The system captures CO₂ directly from the atmosphere, uses water electrolysis to create hydrogen (H₂), and uses our AIRMADE™ Technology to convert the two into fully formulated drop-in fuel on site. The modular design supports rapid deployment and scaling to installation needs.

There is no crude oil and no pipeline anywhere in the chain. No blending on site is needed.

How the AIRCO MAD Fuel System works

We designed around a simple idea: storage does the operational work, and the AIRCO MAD Fuel System keeps the storage full.

  • In peacetime, it builds the reserve and keeps stored fuel turning over, avoiding degradation and maintaining fuel quality.
  • In a crisis, paired with power the grid can’t touch, it keeps refilling the tanks.
  • Over time, a fixed stockpile becomes one that refills itself.

The process has three core steps:

  1. Carbon capture: We pull CO₂ from ambient air using direct air capture (DAC).
  2. Hydrogen generation: We split water through electrolysis, producing H₂ on-site.
  3. Fuel synthesis: We convert CO₂ and H₂ into fully formulated synthetic fuels.

What We’ve Built

  • Full-scale fuel production. We have built and operated full-scale fuel-production systems.
  • Fuels demonstrated with military platforms. Our fuel has been demonstrated in vehicles across air, land, and sea, showing that it performs as a drop-in replacement without engine or infrastructure modifications.
  • AFWERX support. AFWERX has awarded AIRCO a $15 million Strategic Funding Increase (STRATFI) contract to develop the AIRCO MAD Fuel System. That support reflects the Department’s own interest in distributed, resilient fuel supply.
  • Manufacturing in Pennsylvania. We have expanded manufacturing in Pennsylvania to build the first commercial AIRCO MAD Fuel Systems, so they can be delivered and supported at the pace installations need.

The next step is a demonstration on an installation.

How On-Base Fuel Production Fits FORTRESS

FORTRESS’s own wording already points to this capability. The FORTRESS Strategic Defense Reserve pillar calls for “robust inventories, emergency capacity, and stockpile depth to sustain protracted military contingencies.” For liquid fuels, emergency capacity should include on-base production alongside stored inventory.

The Supply Chain and Defense Industrial Base Resilience pillar calls for “mitigating single points of failure.” For many installations, the pipeline that delivers their fuel is one.

Benefits of on-base fuel production

  • Reduces dependence on external supply chains, pipelines, and commercial refineries for critical fuel needs
  • Enhances operational resilience by converting a depleting stockpile into a renewable one.
  • Pairs directly with microreactors, geothermal plants, and other grid-independent power sources
  • Produces fuel that meets existing military specifications with no engine or infrastructure modifications
  • Minimizes water usage through internal recycling and atmospheric water capture
  • Reduces the logistics footprint and convoy risk associated with fuel resupply

No New Water Dependence

Officials have acknowledged that many bases rely on civilian utilities for water and power. That matters for fuel production, because the hydrogen in synthetic fuel comes from water, and a fuel plant tied to the city water main just shifts the dependency elsewhere. We designed our system to avoid that. It recycles the water produced by its own reactor and captures additional water from the air. Once running, its only inputs are air and electricity, and in most climates, it produces more water than it consumes.

Where to Start

The best candidates for a first demonstration already have dedicated, grid-independent power in the pipeline.

Installations with microreactor programs underway:

  • Eielson Air Force Base: Remote location in Alaska makes traditional fuel logistics especially vulnerable.
  • Buckley Space Force Base: Critical space operations demand uninterrupted fuel availability.
  • Fort Bragg: High operational tempo and rapid-deployment mission make fuel resilience essential.

Each of these installations is planned to have the dedicated, grid-independent power the AIRCO MAD Fuel System needs.

The Next Great American Base, planned to operate entirely off the commercial grid, presents an even larger opportunity. Building fuel production into the installation from the start is faster, cheaper, and more effective than bolting it on later.

The Right Time to Ask the Right Questions

FORTRESS is early. Its program office is still assessing roughly 500 installations to understand what resilience will cost, and what capabilities are used to support the five pillars. That makes this the right time to ask two questions:

  1. Should emergency capacity for liquid fuels be defined as on-base production alongside stored inventory?
  2. Where should the first demonstration go?

We think the answer to the first is yes, and we have the experience to help answer the second. If you are working on FORTRESS, installation energy, or fuel logistics, we welcome the conversation. Fuel resilience belongs in the foundation of every installation resilience plan, not as an afterthought.

Reach out to us at hello@aircompany.com

Frequently Asked Questions (FAQs)

What is synthetic fuel?

Synthetic fuel is a liquid hydrocarbon fuel produced from non-petroleum feedstocks. AIRCO produces synthetic fuel from carbon dioxide (CO₂) captured from the air and hydrogen (H₂) generated from water electrolysis, using our AIRMADE™ Technology. The resulting fuel is fully formulated and performs like conventional jet fuel and diesel. A true drop-in solution.

Can synthetic fuel work in existing military engines?

Yes. Our fuel meets existing military specifications and requires no modifications to aircraft engines, tactical vehicle powertrains, or generator systems. It is fully compatible with current storage and handling infrastructure.

How does on-base fuel production improve energy security?

Traditional fuel supply depends on pipelines, centralized production points, and transportation networks, all of which sit outside DoW control. On-base production gives an installation a source of fuel that doesn’t depend on them. The AIRCO MAD Fuel System needs only air and electricity, both of which can be sourced on base with grid-independent power.

How much fuel can the system produce?

The AIRCO MAD Fuel System is modular and scalable. We size each installation to the base’s storage capacity and the fuel its essential operations need, ensuring the system maintains full reserves during peacetime and sustains essential operations during extended contingencies.

Does the system require a water supply connection?

No. The system recycles process water and captures additional water from the atmosphere. In most operating environments, it is a net water producer.